What is the appropriate cutting speed of the circular saw equipment?

What is the cutting speed of the metal circular saw? At this stage, the processing of equipment used in our country, the process of equipment used is large, the cutting speed of circular saws and solid rolling circular saws are different, especially the tape saws used in processing plants, low production efficiency. It costs cost. At the same time, the quality of the workpiece production is poor and the saw is rough, resulting in material waste. The revolution of circular sawing machines is mainly based on the use of circular saws, diameter, processing quality and the output of saw blades. To determine the rotation of the circular saw, first determine the appropriate cutting speed of the circular saw. The cutting speed of a circular saw is related to the diameter and rotation of the saw blade. What is the cutting speed of the circular saw equipment? From improving the processing quality, each saw tooth is very small, and the higher the processing quality, the opposite is lower. From the above formula, the higher the closing speed and diameter of the circular saw, the smaller the amount of each tooth, and the processing quality can be improved. At the same time, increasing the number of teeth of the saw blade can also increase the output. From the perspective of increasing the productivity of circular saws, when the machining quality remains constant, the feed speed is related to the cutting speed. When the cutting speed increases, the feeding speed also increases, and the productivity is high. Therefore, it is advantageous to increase the cutting speed of the circular saw. Practical experience tells us that the cutting speed of the circular saw equipment cannot be too small or too large. When the cutting speed is too high, the vibration of the machine increases. The stability performance of the saw blade itself will decrease, the cutting resistance will increase significantly, and the processing quality and production will drop.